Hardscape Cleaning and Resealing
"A Great way to give the outside of your home a makeover on a budget, Let your house shine"
The Process
- 1. Remove all Stains from concrete, paver, and stone
- 2. Pressure wash and thoroughly clean and neutralize area to be sealed. Let dry for 24hrs
- 3. Test selected sealers in inconspicuous areas in order to select the preferred look
- 4. Carefully apply selected sealers and stone enhancers using appropriate tools
- 5. If there are slippery surfaces, there are additives like croc grip that can be added to make sure that new surface is non slip and safe
- 6. Let dry and touch up any areas that need additional sealer
Most Popular Products and Result - Deck O Shield- Concrete Deck, Waterfall and Natural Stone Sealer (Standard)
- • DECK-O-SHIELD is not a film-forming Material
- • Surface appearance is virtually unchanged after application and complete drying
- • Reduces entrapment of dirt particles and other contaminants that cause discoloration; inhibits soiling
- • Protects against efflorescence and rust staining
- • Helps resist stains from spills
- • Water-based; VOC compliant
- • Protects against salt staining and “whitening” caused by salt in the water
Glaze ‘N Seal Wet Look Lacquer
- • The Original “Wet Look” Lacquer Provides Beautiful High Gloss Protection to decorative, concrete, masonry and natural stone.
- • Film Forming Sealer, Solvent Based
- • For us on Porous materials
- • Resists tough oils, water, and acid- indoors and outdoors
- • Deep bonding formula resists peeling, cracking, UV degradation and efflorescensce
- • Great for Driveways, patios, fountains, and Ponds
- • Products comparison charts are available online @ http://www.deckoseal.com/data/DOS%20Sealer%20Charts.pdf , or @ http://glaze-n-seal.com/sealers.html.
As everyone is spending more time at home it is time that we think about some additional and affordable ways to restore the sparkle to our yards that we once had. Cleaning and sealing all your hardscape is a process that will prevent erosion of stonescapes, efflorescence (white chalking on top of concrete/stone/Pavers), weatherproofs and protects virtually all porous Surfaces, removes stains, prevents water and stain penetration while restoring your concrete or stone back to like new condition.
There is a wide variety of sealers and stone enhancers on the market which can give a wide spectrum of finished looks varying from a clean flat look to a wet shine. Most sealers only need to be re applied every few years, but beware that some super high gloss sealers can be a bit more expensive and in some cases need to be reapplied every 6 months to maintain luster.
It is necessary before sealing anything that a thorough cleaning and pressure washing is completed with proper cleaning agents to remove existing sealer, oils, marks and various stains. This cleaning will neutralize the surface and remove mineral deposits. After area is cleaned and dry, a sealer can be carefully applied. It is best practice to test sealer choices in an inconspicuous area in order to decide which finish you like best. With stone there are specially made enhancers that will impregnate the stone and bring out the natural color. After choosing the correct sealer it is important to work fast and efficiently in order to effectively cover all areas. Special care should be taken to properly apply sealer using a combinations of tools including Sprayers, Paint brushes, rollers and other special tools to ensure even application. Concrete, stone, and pavers should all be sealed separately using the best product for their surface. Allow sealer to dry and then retouch porous areas that need additional sealer. This process will ensure that your investment will looks better, lasts longer and maintains your curb appeal all year long.
Let us know if you have any questions regarding product choices or request a free estimate for your home today.
